01506 862 371

8:30am - 5pm

Visit Us

Unit 1 Brock House, 6c Dunnet Way, East Mains Industrial Estate, Broxburn


KLOU Vibrating Post Driver KPD1

The KPD1 is a high-performance vibrating post-driver, built to drive posts in the most demanding ground conditions. The specialist technology used ensures that the post driver can install posts exceedingly rapidly, while minimising stresses caused to the post. The KPD1 is particularly useful when working in conditions where access to the working area is limited, due to the long reach capabilities that it provides.


Categories: ,

It can be used for the installation of:

  • Bank stabilisation systems in rivers
  • Vineyard stakes
  • Farm fencing
  • Post-and-rail fencing
  • Wooden, plastic and steel shoring systems
  • Jetty support posts

As the KPD1 has no exposed moving parts, and the risk of a post shattering is negligible, it is exceedingly safe to operate. In fact, the low weight and compact dimensions of the unit ensure that it does not impact carrier stability, even at full reach, while also easing transport.


  • The interchangeable post cup/hat (custom options available) allows the post driver to drive a variety of posts, stakes, sheet piles and other uprights accurately
  • Specialist vibration transfer technology transmits vibrations from the unit through the post and into the ground – stones and other obstacles are simply vibrated out of the way
  • The eccentric weight runs in heavy-duty spherical roller bearings mounted within a sealed, oil-filled vibrator housing, removing the need for routine bearing maintenance, while maximising bearing life
  • The vibrator unit is separated from the hitch unit on easily-replaceable rubber mountings, ensuring that vibration is not transmitted into the host machine
  • The rear-mounted hitch maximises the reach of the carrier machine, allowing even the tallest posts to be handled with ease
  • All moving parts are enclosed within a heavy-duty steel housing, minimising safety concerns
  • The hydraulic drive is optimised in order to reduce flow requirements, minimising demands on the carrier machine
  • Hydraulic hoses are protected from scuff wear by heavy-duty spiral wrap


Dimensions (exc. tool grip & post cup)
A – Overall height (mm) 660
B – Overall width (mm) 540
C – Overall length (mm) 305
Overall weight (kg) 165


Hydraulic service requirements
Min/max flow (litres/min) 25/45*
Min/max pressure (bar) 160/255
Case drain required? Yes**
Pressure-free return line (hammer circuit) required? Yes**

*If it is not possible to adjust the output flow on the carrier machine, Klou can install a flow-control valve to permit the KPD1 to be run on carriers providing greater flow

**Case drain required only if pressure-free return line is not available

Scroll to Top