Woodcracker S
These rootstock shears are designed for flush cutting & moving rootstocks in one working step. It was developed for sandy & erosion-prone soils by leaving root material in the ground
Cutting and moving the rootstock in one workstep.
Additional biomass extraction by harvesting of rootmaterial.
Flush cutting means that the root material remains in the soil, the natural cycle is maintained, and the soil, especially on slopes, is anchored.
Safe and fast operation compared with milling technology
Short Facts Download
Find all the information on this product at a glance in this pdf
Application Areas
- Clean cutting of root stock flush to the ground
- Further processing and chipping of the root stock
- Additional biomass mobilisation through the harvest of residual trunk wood
- Usage in loose, sandy and erosion-prone soils
- Developed for sandy and erosion-prone soils, as the root material remains in the soil.
Key Facts
- Available in different sizes for the appropriate carrier vehicle.
- Easy attachment.
- Cutting and moving the rootstock is possible in one work step.
- Robust and proven technology, low-wear and low-service.
- KTL-primed (cathodic dip-coating) and powder coating
- Made of high-strength Hardox® steel.
| S 200 | S 400 | |
|---|---|---|
| Tongs opening (mm) | 410 | 600 |
| Cutting width (mm) | 240 | 480 |
| Weight (Basic model) (kg) | 170 | 760 |
| Recommended litre capacity (l/min.) | approx. 25 – 60 | approx. 60-120 |
| Recommended operating pressure (bar) | 180 – 240 | 240 – 270 |
| Service weight carrier vehicle (t) | 1,5 – 6 | max. 18 |
